Nikon FM2 Body only, 1683 instruction manual Interchangeable focusing screens, Accessories

ACCESSORIES---------------------------

Interchangeable focusing screens

Three different types of focusing screens are usable with the Nikon FM2 . The Type K2 screen comes with the camera as a standard accessory. Two optional focusing screens , Type B2 (matte/Fresnel with focusing spot) and Type E2 (matte/Fresnel with focusing spot and etched grid lines) are also available for the FM2 to match your particular requirements .

To change focusing screens, follow this procedure:

1.Remove the lens from the camera body.

2.Slip the small tip of the special tweezers (that come with the optional screens) under the focusing screen release latch ® at the top front of the mirror box casting and pull outward to spring open the holder.

3.Take the screen out by grasping the small tab with the tweez- ers .

4.Carefully position another screen in place with the flat side facing down and the side with the tab facing up.

5.Then push the front edge of the holder upward with the tweez- ers until it clicks into position .

Note: To avoid getting smudges or fingerprints on the screen 's optical surface, do not handle the screen with your fingers.

36