Nikon 1683 Pull out the film advance, lever lI to unlock the shutter release button g

4 Pull out the film advance

•lever (lI to unlock the shutter release button (g •

The film advance lever doubles as a shutter release button lock. You can un- lock the shutter release button by simply pulling out the film advance lever slightly from the flush to the standoff position .

5 Press the shutter

•release button lightly to switch the exposure meter on.

The shutter release button activates the exposure meter when lightly pressed. The meter itself stays on for approx. 30 sec. after you have taken your finger off the button.

6 Check battery power.

•Switch the exposure meter on while looking through the viewfinder. If one or two of the red LED exposure indicator lamps inside lights up this would mean normal condition.

Note: When the shutter speed dial ® is on B (bulb), none of the exposure indicator lamps will light up. Be sure to set the dial at another posi- tion. If none of the exposure indicator lamps light up, either the battery is improperly in- stal/ed-in which case you should instal/ it properly-or battery power is not sufficient, in which case you should change the battery.

7