Troubleshooting
Problem
Sensor will not register with the Wireless System Controller
Motion events are not triggered
Solution
•Ensure that the sensor has fresh batteries.
•Ensure that the Wireless System Controller is powered and online.
•Ensure that you are pressing the Discovery button.
•Reposition the sensor closer to the Wireless System Controller.
•Try another location.
•Ensure that the sensor is not positioned behind glass. The motion sensor is triggered by changes in heat. Any material such as glass that "insulates” keeps the camera from detecting heat changes (movement).
•Ensure that the sensor is positioned properly, avoiding obstacles that can interfere.
•Consider adding a Motorola Wireless Signal Repeater (HMAC9100) to increase device signal communication range.
FAQ
How far away can the sensor “see?”
The motion sensor is capable of detecting objects up to 20 feet away with a field of view of 90 degrees.
How can I most effectively use my Wireless Motion Sensor with my homesight System’s video camera?
The WMS can act as a trigger to your system’s wired or wireless video camera. By positioning it in area ahead of the motion sensor built into the video camera, the Wireless Motion Sensor can trigger an event ahead of time to have the video recorder capture the event in its entirety. Keep in mind that the survey field of the WMS is 90 degrees when you position it in relation to your video camera. Try not to have the WMS aimed directly in front of where the events will typically take place, but rather,to the side or angled so as to include as much of the area in its sweep as possible.
6
