Nikon HMSM4050 quick start Introduction, Using Your Motion Sensor, How It Works, Controller

Introduction

Congratulations on your purchase of the Motorola Wireless Motion Sensor (WMS). Your sensor uses a heat/motion detector to scan a field 90 degrees wide up to a range of approximately 20 feet. This enables you to secure an area, regardless of day or night, rain or shine. This Quick Start Guide describes how to set up and troubleshoot your Wireless Motion Sensor.

Using Your Motion Sensor

The WMS can report detected events or interact with other system devices when motion is detected to record the event. Positioning is critical in the mounting of your WMS, particularly if used in conjunction with a Motorola homsight™ Video Camera to record triggered events. Using your computer and the Wireless System Controller, you locally manage your home environment from your PC with the Motorola homesight™ software. When configured, the system can notify you of any new events by sending you an e-mail. An event is defined as movement in the field covered by the heat /motion sensor.

How It Works

The Wireless Motion Sensor can communicate with the Wireless System Controller to a distance of up to 60 feet indoors, and 200 feet outdoors. It can detect heat/motion within a field of 90 degrees horizontally. If armed, heat/motion triggers an event that is communicated wirelessly back to the Wireless System Controller, which in turn sends event information back to your PC.

Controller

2