Nikon HMSM4050 quick start Table Mount Your Wireless Motion Sensor, Wall Mount Drilling Template

Wall Mount Drilling Template

Mounting tools: Screwdriver, electric drill or awl. On hard surfaces, Motorola recommends that you pre-drill ½-inch deep pilot holes with a drill bit slightly smaller than the bracket mounting screws before securing the bracket to the surface. When mounting a sensor on soft surfaces like sheetrock, use an awl to punch holes in the material slightly smaller than the plastic anchors included in the hardware mounting kit.

The illustration is drawn to a one-to-one scale, which means that it provides the exact dimensions required to mount the unit.

Drill Holes In	1.76 in
These Positions

Table Mount Your Wireless Motion Sensor

The sensor can be placed on any horizontal surface.

1 Locate the sensor on a horizontal surface.

2 Ensure that fresh batteries have been installed.

3 Make adjustments to the sensor coverage angle by tilting and panning the unit with your hand.

5