Nikon J3 White, 27658, 27649, 27638, 27637 manual Storage and Cleaning, Lens, Monitor

Storage and Cleaning

Storage

If the camera will not be used for an extended period, remove the battery and store it in a cool, dry area with the terminal cover in place. To prevent mold or mildew, store the camera in a dry, well-ventilated area. Do not store your camera with naphtha or camphor moth balls or in locations that:

•are poorly ventilated or subject to humidities of over 60%

•are next to equipment that produces strong electromagnetic fields, such as televisions or radios

•are exposed to temperatures above 50 °C (122 °F) or below –10 °C (14 °F)

Cleaning

	Use a blower to remove dust and lint, then wipe gently with
	a soft, dry cloth. After using the camera at the beach or sea-
Camera body	side, wipe off sand or salt with a cloth lightly dampened in
	distilled water and dry thoroughly. Important: Dust or other
	foreign matter inside the camera may cause damage not cov-
	ered under warranty.
	Lenses are easily damaged. Remove dust and lint with a
	blower. If using an aerosol blower, keep the can vertical to
Lens	prevent the discharge of liquid. To remove fingerprints and
	other stains, apply a small amount of lens cleaner to a soft
	cloth and clean with care.
	Remove dust and lint with a blower. When removing finger-
Monitor	prints and other stains, wipe the surface lightly with a soft
	cloth or chamois leather. Do not apply pressure, as this
	could result in damage or malfunction.
Dust shield	The dust shield is easily damaged. Remove dust and lint
	with a blower.

Do not use alcohol, thinner, or other volatile chemicals.

n

171