Viewing Pictures on a Computer
Install PictureProject Before Connecting the Camera
If PictureProject is not installed before the camera is connected, a hardware wizard
may be displayed. Click Cancel to exit and then disconnect the camera.
1 Turn the camera off.
2 Connect the USB cable as shown at right. Con-
nect the camera directly to the computer; do
not connect the cable via a USB hub or key-
board. Do not use force.
3 Turn the camera on. PictureProject will automatically detect the camera
and the PictureProject Transfer window will be displayed in the computer
monitor. Click Transfer to copy all the pictures in the camera memory to
the computer.
Windows XP
If the dialog shown at right is displayed, select Copy
pictures to a folder on my computer using
PictureProject and click OK. To bypass this dialog in future, check Always do the selected action.
NOTE: The screenshots in this section are from Windows XP.
21
