DETERMINING EXPOSURE

Camera Accessories Exposure measurement

Al TC-301 Full-aperture

Al Bellows Stop-down

non-AI TC-301 Stop-down

non-AI Bellows Stop-down

With Built-in TTL Metering

The Micro-Nikkor has an automatic diaphragm with settings from f/4 to f/32 and couples to the thru-the-lens meter of the Nikon F3, any Nikon F2 Photomic or other Nikon/Nikkormat cameras for full-aperture exposure measurement over the entire range of aperture settings. Note that when this lens is used with non-AI cameras, "manu- al" maximum aperture indexing is required. When a teleconverter or bellows attachment is used, the exposure measurement method is as shown in the table on the left.

See the instruction manual supplied with your camera for details.

Caution:

1)When the full-aperture method is used at smaller aper- tures than the lens maximum aperture of f/4 with the lens set at the closest focus distance, make approx.

-112 EV exposure compensation to prevent overex- posure.

2)When the stop-down method is used at small aper- tures, use a finder eyecup to ensure complete ex- clusion of stray light.

10

Page 10
Image 10
Nikon Micro-Nikkor 200mm f/4 IF instruction manual Determining Exposure, With Built-in TTL Metering