yMd Sports

•While the shutter-release button is held all the way down, the camera shoots up to about 7 images continuously at a rate of about 7 fps (when image quality is set to Normal and image size is set to i4608×3456).

•The frame rate for continuous shooting may become slow depending on the current image quality setting, image size setting, the memory card used, or shooting condition.

•Focus, exposure, and hue are fixed at the values determined with the first image in each series.

yMfParty/indoor

•To avoid the effects of camera shake, hold the camera steady. Set Vibration reduction to Off in the setup menu (A57) when using a tripod to stabilize the camera during shooting.

yMkClose-up

On the screen displayed when kClose-up is selected, select Noise reduction burst or Single shot.

•Noise reduction burst: This enables you to shoot a sharp image with a minimum of noise.

-Press the shutter-release button all the way to capture a series of images which are combined into a single image and saved.

-Once the shutter-release button is pressed all the way, hold the camera still until a still image is displayed. After taking a picture, do not turn the camera off before the monitor switches to the shooting screen.

-If the subject moves or there is a significant camera shake during continuous shooting, the image may be distorted, overlapped, or blurred.

-The angle of view (i.e., the area visible in the frame) seen in the saved image is narrower than that seen in the monitor at the time of shooting.

•Single shot (default setting): Saves images with emphasized outlines and contrast.

-One image is captured when the shutter-release button is pressed all the way.

•The focus mode (A40) setting is changed to D(macro close-up) and the camera automatically zooms to the closest position at which it can focus.

•You can move the focus area. Press the kbutton, use the multi selector HIJKor rotate it to move the focus area, and press the kbutton to apply the setting.

Section Reference

E5