Nikon S230 user manual Removing Memory Cards, Inserting Memory Cards, Formatting Memory Cards

Inserting Memory Cards

Removing Memory Cards
Before removing memory cards, turn the camera off
and confirm that the power-on lamp and monitor are
off. Open the battery-chamber/memory card slot cover
and press the card in 1to partially eject the card. The
card can then be removed by hand. Do not attempt to
remove the card at an angle 2.
B Formatting Memory Cards
If the message at right is displayed, the memory card must be	Card is not formatted.
formatted before use (A 137). Note that formatting permanently
	Format card?
deletes all pictures and other data on the memory card. Be sure
to make copies of any pictures you wish to keep before formatting
the memory card.	Yes	No
Tap Yes. When the confirmation dialog is displayed, tap Yes. To start
formatting, tap OK.

•Do not turn the camera off or open the battery-chamber/memory card slot cover until formatting is complete.

•The first time you insert the memory cards used in other devices into the COOLPIX S230, be sure to format them using this camera (A 137).

BThe Write Protect Switch

Memory cards are equipped with a write protect switch. When Write protect switch this switch is in the “lock” position, data cannot be written to,

or deleted from, the memory card. If the switch is in the “lock” position, unlock it by sliding the switch to the “write” position to record or delete pictures, or to format the memory card.

First Steps

BMemory Cards

• Use only Secure Digital memory cards.

• Do not perform the following during formatting, while data is being written to or deleted from the memory card, or during data transfer to a computer. Failure to observe this precaution could result in the loss of data or in damage to the camera or memory card:

- Take out the battery or memory card - Turn off the camera

- Disconnect the AC adapter

• Do not format the memory card using a computer.

• Do not disassemble or modify.

• Do not drop, bend, or expose to water or strong physical shocks.

• Do not touch the metal terminals with your fingers or metal objects.

• Do not affix labels or stickers to the memory card.

• Do not leave in direct sunlight, closed vehicles or areas exposed to high temperatures.

• Do not expose to humidity, dust, or to corrosive gases.

23