Anti-shake Mode
Shooting in Anti-shake Mode
In anti-shake mode, vibration reduction (c 114) and BSS (c 95) are enabled. In addition, ISO sensitivity is automatically raised to 1600 depending upon the brightness of the subject and shutter speed is faster than with L (auto) mode, under the same lighting conditions, to reduce blurring caused by camera shake or subject movement. The flash is disabled. This mode is most effective when shooting under natural light. Combine it with the telephoto zoom when you are forced to shoot from a distance in order to capture a fleeting expression on a portrait subject or to photograph an animal without frightening it off.
1 Press F.
The camera enters anti-shake mode. Press again to return to the shooting mode selected in the shooting- mode selection menu.
| | | | | | |
2 Frame the subject and take the | | | | |
| | | B M |
picture. | | | | W |
| | |
| | |
| | |
While the shutter-release button is held | | | |
| | | W |
down, camera takes shots to a maxi- | | | | |
mum of ten, they are compared and | | | | | | |
| | | | |
sharpest picture (picture with highest | 6 |
level of detail) is saved. | | | | |
| | | |
jNotes on Anti-shake Mode
•Shutter speed is limited to a certain value for dark subjects.
•Use of the high-sensitivity shooting mode (c 33) is recommended for shooting subjects under low lighting.
•Pictures taken in this mode may become somewhat grainy.
kAnti-shake Mode Settings
Vibration reduction (c 114) and BSS (c 95) are enabled; the flash is disabled. The following items in the shooting menu are locked and cannot be adjusted: [White balance], [Auto]; [Con- tinuous], [Single]; [Color options], [Standard color]; [Focus area], [Center]. Macro close-up mode and exposure compensation are available; the self-timer is not available.
lImage Mode in Anti-shake Mode
