![](/images/new-backgrounds/1245328/24532831x1.webp)
First Steps
IP address (home wireless LAN only)
This is a unique identifier assigned to communication devices on a computer network. The IP address can be acquired automatically with this camera. If the network uses a fixed IP address, manually enter the camera’s IP address, as well as the subnet mask, gateway, primary DNS, and secondary DNS.
User name/Password (public wireless LAN only)
The user name and password provided by the wireless service provider to which you subscribe may be necessary when configuring the camera’s network profile or connecting to the network.
When MAC Address Filtering Disables Home Wireless LAN Access
If your access point’s SSID is not set to “any” (to allow connection of any wireless device), or if MAC address filtering (a unique identifier attached to each device on a LAN) is enabled, use a computer to modify access point settings to allow connection of any wireless device and register the camera’s MAC address with the access point beforehand. Follow the procedure below to confirm the camera’s MAC address.
1Press the e button in playback mode or shooting mode. Use the rotary multi selector to choose F and press the k button.
Set up
Set up |
Menus |
Welcome screen |
Date |
Monitor settings |
Date imprint |
The setup menu is displayed.
For information on using the rotary multi selector, see “Basic Menu Operation” (A26).
2Use the rotary multi selector to choose Firmware version and press the k button.
Set up |
Wireless settings |
Firmware version |
COOLPIX S610c Ver. 1.0
MAC address
Back
MAC address
10