Nikon S9100 user manual Erroraccessingmemory, 200

The following table lists the error messages and other warnings displayed in the monitor, as well as the solutions for dealing with them.

Display (blinks)

O

Battery exhausted.

O

Battery temperature high

O

The camera will turn

off to prevent overheating.

n

_e (0 blinks red)

Problem

Clock not set.

Battery exhausted.

Battery temperature is Ngh.

Memory card or inside of camera has become

hot.

Camera cannot focus.

Solution 7!_i

Set date and time.

Charge or replace the battery.

Turn off camera, and allow battery to cool down before resuming use. After five seconds, this message will disappear, the monitor will turn off, and the power-on lamp will blink rapidly. After the lamp blinks for three minutes, the camera will turn off automatically. Pressing the

power switch also turns off the camera.

The camera turns off

automatically. Leave the camera off until the memory card or the inside of the camera has cooled and then

turn it on again.

Refocus.

Use focus lock.

.....

72

14,16

19

28, 29 55

O

Please wait for the camera to finish

mrecording.

(b

Memory card iswrite protected.

O

This card cannot be used.

O

This card cannot be read.

Camera cannot		perform	Wait until message clears
other	operations	until	from	display	automatically
saving	is complete.		when	saving	is complete.
Write-protect switch is			Slide write-protect			switch	to	23
in "lock" position.			"write" position.
			Use approved			card.		198
Erroraccessingmemory			Check that		terminals are			22
			clear].
card.
			Confirm that memory				card	22
			is correctly		inserted.

200