Nikon S9100 user manual Shooting, or the Scene auto, selector or Close, to Auto

Shooting

Problem

Cannot switch to shooting mode.

No image captured when the shutter-release button is

pressed.

Camera cannot focus.

Images are blurred.

Bright specks appear in images captured with flash.

Flash does not fire.

Digital zoom cannot be used.

Image mode not available.

				Cause/Solution							[]_]
											155,
Disconnect			HDMI cable			or USB cable.					158,
											164
When camera				is in playback				mode, press the			4,30
[]	button		or	shutter-release				button.
When menus				are displayed,				press the MENU			12
button.
Battery is exhausted.											24
When flash lamp					blinks, flash			is charging.			34
Subject		istoo		close. Try shooting						using macro	39,61,
mode,		or the Scene auto					selector or Close-				70
up scene modes.
The intended				subject		isone		with		which	29
autofocus does not perform well.
Set AF assist in the setup menu										to Auto.	181
Turn camera				off and then			on again.				19
Use flash.											32
Enable vibration					reduction		or motion				178,
detection.											180
Use BSS(best shot selector).											82
Use tripod			and self-timer.								35
Flash is reflecting off particles in air. Lower the											34
flash or set the flash mode setting to (_) (off).
The flash			is lowered, or flash mode is set to								32
(_) (off).
Scene mode				with which the				flash does not			64
fire	isselected.
FBsh is not fully					raised. Do not				hold down the		26
flash.
Another		function			that	restricts			flash is		87
enabled.
Digital zoom is set to Off in the setup menu.
Another		function			that	disables			digital zoom is		182
enabled.
Another		function			that	restricts			the Image		87
mode		option		is enabled.
Available			image		modes differ according to the						47
current		shooting			mode.

2-

ff

$

o_

207