tCamera’s metering mode and i-TTL flash control

•When the camera’s metering mode is changed to spot metering while i-TTL balanced fill-flash is in use, the i-TTL flash control automatically changes to the standard i-TTL flash.

•The i-TTL flash control automatically changes to i-TTL balanced fill-flash, after changing the camera’s metering mode from spot metering to other metering modes.

vWhen insufficient flash output for correct exposure is indicated

• When the flash-ready indicators on the SB-500 and in the camera’s viewfinder flash slowly for approximately 3 sec. after firing, underexposure due to insufficient flash output may have occurred.

•To compensate, use a wider aperture (smaller f-number) or higher ISO sensitivity, or move the flash unit closer to the subject and reshoot.

C

Flash Control Modes

C-2