Nikon SBV5121 manual Either/or

Introduction

Installation

Troubleshooting Glossary License

5Check that the lights on the front of the VoIP cable modem cycle through this sequence:

•

•

•

Power flashes during the self-test and changes to solid green when the self-test is successfully complete.

Receive flashes while scanning for the receive (downstream) channel and changes to solid green when it is connected.

Send flashes while scanning for the send (upstream) channel and changes to solid green when it is connected.

•Online flashes while the VoIP cable modem downloads configuration data and changes to solid green when the download is complete.

6Connect your computer to the VoIP cable modem using USB or Ethernet:

	Either/or
	TEL 1
	TEL 2
	ETHERNET
	USB
	CABLE
	+12VDC
Computer	VoIP cable modem

USB: Be sure the SBV5121 VoIP Cable Modem CD-ROM is inserted in your CD-ROM drive. Perform the appropriate procedure for Setting Up a USB Driver for your Windows version. Connect the USB cable to the USB port on the VoIP cable modem. Connect the other end to the USB port on your PC.

Ethernet: Connect the provided straight-through Ethernet cable to the Ethernet connector on the VoIP cable modem. Connect the other end to the Ethernet port on your computer. Ethernet users do not need to set up USB.

7Perform the procedures for “Configuring TCP/IP” on page 20.

SBV5121 VoIP Cable Modem User Guide 9