Nikon UX5000 manual Set Up a Conference Telephone Meeting, Forward reroute Your Calls

Set Up A Conference (Telephone Meeting)

To set up a conference/meeting:

1.Place or answer your first call + CONF.

2.Place or answer your next call + CONF.

3.Press CONF again to begin the Conference.

–To add additional callers to your Conference (up to 32 callers), press CONF and repeat steps 2 through 3

–You can add either Intercom or outside callers.

–If you hear an error tone after trying to add another party, your Conference is full.

–To place a Conference on Hold, press HOLD but do not hang up. To reinstate the Conference,

Forward (reroute) Your Calls

To forward (reroute) your calls to a co-worker, voice mail or off-premise:

1.CALL1 + Dial *2.

Soft Keys can also be used to access the Call Forward feature.

OR

1.To forward off-premise: *46 + Line access code (e.g. 9) + Telephone number + HOLD.

To cancel: *46 + HOLD + Hang up.

2.Dial Call Forwarding Condition:

–1= Personal Answering Machine Emulation (then skip to step 4)

–2= Busy or not answered

–3= Follow Me

–4= Immediate

–6= Not answered

–7= Immediate with both ringing (not for Voice Mail)

–0= Cancel

3.Dial destination extension, the Voice Mail master number (normally 700), or press your Voice Mail key.

4.Dial Call Forwarding type:

–2= All calls

–3= Outside calls only

–4= Intercom calls only

 DND flashes slowly. A voice prompt may remind you that your calls are forwarded.

To cancel Call	Forward:
1.	CALL1 + Dial *2. + Dial 0.	9

Features to Make You More Productive