Insert the Camera, Opening the Case | Nikon WP-CP2 instruction

2. Insert the Camera

		Turn the camera off
		Release the buckle
		Release the buckle
		Pressing the buckle release button (), slide the
		latch forward () and open the buckle ().

Open the case

Opening the Case

Do not open the case in areas exposed to blown sand or spray. Keep the case upright; do not place the open case with the O-ring or O-ring seal face down.

Insert the camera

Position the camera in the camera guides with the lens in the lens window.

Insert the Camera

9

Image 16

Nikon WP-CP2 user manual Insert the Camera, Opening the Case

Contents

Waterproof Case User’s Manual For Your Safety Turn camera off immediately in the event of malfunction Do not dive while holding Iii Temperature Table of Contents Important Use Only with Compatible Cameras Life-Long Learning Package Contents Introduction Parts of the WP-CP2 Attaching the Strap Introduction Using the WP-CP2 Overview Take Pictures 13-14 Check for Leaks Check for Leaks Batteries Insert the CameraSee the camera Guide to Digital Photography Insert the Camera Opening the Case Perform a Final Check Insert DesiccantReplacing the Desiccant Close the Case Check for Leaks Again Take Pictures Adjust SettingsTurn the Camera On Take Pictures Don’t Block the ShotUse the Monitor Underwater Photography Drying the Case Clean the CaseRemoving the Camera Cleaning the Interior of the Case Do Not Exposure to Sunlight or Heat Maintenance Caring for the O-ringDo Not Use Force or Sharp Objects Replacing the O-ring Cleaning Grease the O-ring Optional Accessories Technical NotesStorage Speciﬁcations