Take Pictures, Turn the Camera On, Adjust Settings | Nikon WP-CP2

Take Pictures

1. Turn the Camera On

Press the power switch on the waterproof case. The camera power-on lamp will light and the monitor will turn on.

2. Adjust Settings

The controls on the case correspond to the following camera controls. For more information, see the camera Guide to Digital Photography.

Mode dial

Zoom buttons

Multi selector

(playback) button

MENU button

(delete) button

13

Image 20

Nikon WP-CP2 user manual Take Pictures, Turn the Camera On, Adjust Settings

Contents

Waterproof Case User’s Manual For Your Safety Turn camera off immediately in the event of malfunction Do not dive while holding Iii Temperature Table of Contents Important Use Only with Compatible Cameras Life-Long Learning Package Contents Introduction Parts of the WP-CP2 Attaching the Strap Introduction Using the WP-CP2 Overview Take Pictures 13-14 Check for Leaks Check for Leaks See the camera Guide to Digital Photography Insert the CameraBatteries Insert the Camera Opening the Case Replacing the Desiccant Insert DesiccantPerform a Final Check Close the Case Check for Leaks Again Turn the Camera On Adjust SettingsTake Pictures Take Pictures Don’t Block the ShotUse the Monitor Underwater Photography Removing the Camera Clean the CaseDrying the Case Cleaning the Interior of the Case Do Not Exposure to Sunlight or Heat Maintenance Caring for the O-ringDo Not Use Force or Sharp Objects Replacing the O-ring Cleaning Grease the O-ring Optional Accessories Technical NotesStorage Speciﬁcations