Parts of the WP-CP2, Attaching the Strap | Nikon guide

Introduction

Parts of the WP-CP2

Shutter-release button ( 14;		) Power switch ( 13; )
	Buckle	Diffusion panel
(	6, 9, 11)
	Latch	Lens window
(	6, 9, 11)

O-ring/O-ring guide (

17)

Camera guides (

9)

Front cover

Rear cover

Watertight channel (

10, 17)

O-ring seal ( 10, 17)

Attaching the Strap

2

Image 9

Nikon user manual Parts of the WP-CP2, Attaching the Strap

Contents

User’s Manual Waterproof Case Turn camera off immediately in the event of malfunction For Your Safety Do not dive while holding Iii Temperature Table of Contents Life-Long Learning Important Use Only with Compatible Cameras Introduction Package Contents Attaching the Strap Parts of the WP-CP2 Introduction Overview Using the WP-CP2 Take Pictures 13-14 Check for Leaks Check for Leaks Insert the Camera BatteriesSee the camera Guide to Digital Photography Opening the Case Insert the Camera Insert Desiccant Perform a Final CheckReplacing the Desiccant Close the Case Check for Leaks Again Adjust Settings Take PicturesTurn the Camera On Don’t Block the Shot Take PicturesUse the Monitor Underwater Photography Clean the Case Drying the CaseRemoving the Camera Do Not Exposure to Sunlight or Heat Cleaning the Interior of the Case Caring for the O-ring MaintenanceDo Not Use Force or Sharp Objects Replacing the O-ring Grease the O-ring Cleaning Technical Notes Optional AccessoriesStorage Speciﬁcations