Niles Audio 8 manual

•RF Test Port – Also located on the upper left side of the MSU is the RF Test Port. The RF Test Port enables you to receive real-time confirmation that RF signals are received and understood, detect interference, and test for sync status. The bicolor RF/IR Test LED (FG00727) is available as an accessory, and should be sold and installed in every IntelliControl home theater.

•Video Sync Inputs – The eight Composite (RCA) Video Sync Ports are provided to sense the on/off power status of IR controlled components with video output. Your system design may require additional video cables and “Y” adapters.

•12V Sync Inputs – The 12V Sync Inputs are provided to sense the on/off power status of IR controlled components. Your system design may require 12V DC wall adapters or Niles switchers (APC-2, LS-1, OTI-512) with a 10’ Accessory Cable (FG00724).

•Transfer Connector – The three conductor Transfer Connector enables the transfer of programming information from the IntelliFile II PC Interface or the original IntelliControl Programmer to the MSU and vice versa. You may want to permanently install a 20’ Transfer Cable (FG00725) to provide future access for programming updates.

•IR Flasher Outputs- The twelve IR Flasher Outputs issue IR codes to IR controlled components. Your system design may require IRC-2P MiniFlashers (FG00726) and/or 3.5 to 3.5 mono mini-plug cables for hardwired connections to compatible components.

•12V DC Control Voltage Outputs – These connections can be used to trigger screens, Niles switchers, and other devices. Your system design may require 10’ Accessory Cables (FG00724). The IntelliControl features an “Audio 12V” output (active whenever a source that utilizes the preamp is selected), a “Video 12V” output (active whenever a source that utilizes the TV is selected), and an “Assignable 12V” output (activated as part of a sequence with the “Assignable Relay On” command).

•Dry Contact Closures / Relays – These connections can be used to trigger lights, curtains, screens, lifts, and other devices. Your system design may require multi- conductor cable. The IntelliControl features a “Video Relay” (active whenever a source that utilizes the TV is selected), and an “Assignable Relay” (activated as part of a sequence with the “Assignable Relay On” command).

•IR Data Input Connectors (“Home Theater IR” and “Second Zone IR”) – These connections enable IR data to be fed into the MSU from Niles IR sensors, keypads, IR Main System Units, or Multi-room Controllers around the house. IR data received at the “Home Theater IR” port is passed through all flashers. IR data received at the “Second Zone IR” port is passed through flashers 1 – 8 only.

•Antenna Socket – This F-connector accommodates a 1’ to 200’ length of high quality quad-shielded RG-6 coax cable with 6-3/4” of the center conductor exposed. It is suggested that the exposed tip of the antenna be located as far from the main equipment location (and as close to the user’s location) as practical.

•IR Flasher Level Controls – The twelve flasher level controls enable the installer to control the strength of the IR output sent to each of the components in the system. Flasher strength increases as the pots are turned clockwise (a jeweler’s screwdriver is

8 specifications

The Niles Audio 8 represents a significant advancement in the world of home audio, combining superior sound quality with innovative technology tailored for both audiophiles and casual listeners. This in-wall speaker is designed to provide an immersive listening experience while seamlessly integrating into modern home environments.

One of the standout features of the Niles Audio 8 is its exceptional sound clarity and depth. The speaker is equipped with an 8-inch polypropylene woofer, which delivers deep, resonant bass, while the 1-inch aluminum dome tweeter ensures crisp and clear highs. This combination allows users to enjoy a wide frequency response, making it suitable for a diverse range of music genres and audio formats.

Another key characteristic of the Niles Audio 8 is its sophisticated installation design. The speaker utilizes a low-profile grille that can be painted to match the surrounding wall, allowing it to blend effortlessly with the home decor. Its easy-to-install mounting system simplifies the process, making it an ideal choice for both professional installers and DIY enthusiasts. The speaker's rear sonic ports are engineered to enhance the bass response, ensuring that the sound fills the room without overwhelming it.

In terms of technology, the Niles Audio 8 employs advanced sound dispersion techniques, allowing it to project sound evenly throughout the space. This ensures that no matter where listeners are seated, they can enjoy uniform sound quality. The inclusion of high-quality crossover components further optimizes audio performance, resulting in a balanced output that highlights both the low and high frequencies without distortion.

Durability is another strong point of the Niles Audio 8. Constructed with robust materials, the speaker is designed to endure the rigors of indoor environments while maintaining its aesthetic appeal. Its weather-resistant features also make it suitable for outdoor installations, allowing homeowners to create a cohesive audio experience throughout their property.

Overall, the Niles Audio 8 stands out in the competitive home audio market due to its blend of advanced engineering, versatile design, and exceptional sound quality. Whether you are setting up a dedicated home theater system or creating a multi-room audio experience, the Niles Audio 8 provides the performance and flexibility to meet your audio needs.