by hand. If you wish to change an installed label, use a knife to gently pry the label protector off the key.

e.To operate multiple IntelliControls within one house, you must change the “Unit ID” setting. The Tabletop Remote transmits a “Unit ID” with each RF command. There are 16 possible “Unit ID” settings which are configured via DIP switches inside the battery compartment of the Tabletop Remote. This enables up to 16 systems to simultaneously operate within a 100ft radius on the same transmitting frequency. Note: The DIP switch settings inside the Tabletop Remote must match the “Unit ID” settings as configured on the “Utilities” tab in the IntelliFile II software.

f.Insert 3 “D” size alkaline batteries (not included) into the remote control. Be sure to maintain polarity.

4.Construct an Antenna

a.The antenna must be constructed of QUAD SHIELD RG-6 cable. The quad shield prevents RF interference generated by the home theater components from being picked up by the IntelliControl’s antenna. Use a long enough piece of cable so that the “antenna” end of the cable is at least ten feet from any RF generating component (DSS receiver, D to A converter, personal computer, etc. ).

Note: It is always a good Idea to locate the exposed tip of the antenna as far away from the components (and as close to the user) as practical to assure reliable RF reception.

b.To create the actual antenna, simply strip 6-3/4” of shield from the coax, leaving the plastic insulator in place. If the plastic insulator is accidentally removed, be sure to wrap the exposed center conductor with electrical tape to protect against electrostatic shock.

c.Attach an “F” connector to the other end and connect to the MSU.

5.Testing and Troubleshooting RF Transmission and Reception

a.Activate the Tabletop Remote by pressing a Master Key. Note: One of the Master Keys must be selected (and lit) before a radio transmission will occur when a Function Key is pressed.

b.Observe the RF test LED while tapping “Channel Up” (or any Function Key) approximately once per second while moving the remote throughout the room. Try the antenna in various concealed locations, testing for the best range and accuracy by watching the RF Test LED as you operate the remote. You may need to try reposition the antenna to get good results in every location.

A Flash of the Green LED = Indicates that the radio transmission has been received and understood. Move the remote to a new location within the room and retest until the remote operates properly in any potential end-use location.

A Flash of the Red LED = Indicates that interference was received or the button was tapped too rapidly. Press the “Channel Up” key no faster than once per second when testing. If the red LED lights frequently (or intermittently), move the antenna to another position and retest. If no position results in reliable flashes of the green LED, attempt

42

Page 46 Page 48
Page 47
Image 47
Niles Audio 8 manual Construct an Antenna, Testing and Troubleshooting RF Transmission and Reception
Page 46 Page 48

8 specifications

The Niles Audio 8 represents a significant advancement in the world of home audio, combining superior sound quality with innovative technology tailored for both audiophiles and casual listeners. This in-wall speaker is designed to provide an immersive listening experience while seamlessly integrating into modern home environments.

One of the standout features of the Niles Audio 8 is its exceptional sound clarity and depth. The speaker is equipped with an 8-inch polypropylene woofer, which delivers deep, resonant bass, while the 1-inch aluminum dome tweeter ensures crisp and clear highs. This combination allows users to enjoy a wide frequency response, making it suitable for a diverse range of music genres and audio formats.

Another key characteristic of the Niles Audio 8 is its sophisticated installation design. The speaker utilizes a low-profile grille that can be painted to match the surrounding wall, allowing it to blend effortlessly with the home decor. Its easy-to-install mounting system simplifies the process, making it an ideal choice for both professional installers and DIY enthusiasts. The speaker's rear sonic ports are engineered to enhance the bass response, ensuring that the sound fills the room without overwhelming it.

In terms of technology, the Niles Audio 8 employs advanced sound dispersion techniques, allowing it to project sound evenly throughout the space. This ensures that no matter where listeners are seated, they can enjoy uniform sound quality. The inclusion of high-quality crossover components further optimizes audio performance, resulting in a balanced output that highlights both the low and high frequencies without distortion.

Durability is another strong point of the Niles Audio 8. Constructed with robust materials, the speaker is designed to endure the rigors of indoor environments while maintaining its aesthetic appeal. Its weather-resistant features also make it suitable for outdoor installations, allowing homeowners to create a cohesive audio experience throughout their property.

Overall, the Niles Audio 8 stands out in the competitive home audio market due to its blend of advanced engineering, versatile design, and exceptional sound quality. Whether you are setting up a dedicated home theater system or creating a multi-room audio experience, the Niles Audio 8 provides the performance and flexibility to meet your audio needs.
Top Page Image Contents