Niles Audio CM8SW manual Connections

Connections

Connections

Single Stereo Subwoofer

A four conductor (Left+, Left-, Right+ and Right-) wire 16 gauge or larger (see side- bar on speaker wire gauge) is run from the amplifier location to the local volume control (See Figure 4).

Amplifier

LeftRight

Dual Subwoofer Systems

A four conductor (Left+, Left-, Right+ and Right-) wire 16 gauge or larger (see side- bar on speaker wire gauge) is run from the amplifier location to the local volume control (See Figure 5).

Amplifier

LeftRight

		Either Input okay
	Left and Right
	No-Strip wire input termina
CM8SW
	CM8SW	Wire to		CM8SW
		Corresponding
		Output
	Left and Right
	No-Strip wire output termin
	Satellite Speaker		Satellite Speaker
	Figure 5
	A Dual CM8SW Hook-Up
Satellite Speaker	Satellite Speaker

Figure 4

A Single CM8SW Hook-Up

From the local volume control the four conductor cable is run to the CM8SW and connected to the Input connectors. A two conductor wire is connected to each of the stereo outputs and fed to the left and right speakers. Now, the volume control will raise and lower the volume for the sub- woofer and the left and right speakers simultaneously. Additionally, the crossover is now connected so that the crossover switches can be adjusted.

From the local volume control a two con- ductor cable is run to each of the CM8SWs and connected to either the left or the right Input connectors.

Each of the satellite speakers must be con- nected to the correct subwoofer. Typically, a two conductor wire is connected to one of the outputs on the left channel sub- woofer and fed to the left satellite speaker and another two conductor wire connects the right channel subwoofer and satellite.

Now, the volume control will raise and lower the volume for the subwoofer and

5