Niles Audio CM8SW manual TCC Speaker Cone, High-Power Handling

Features and Benefits

TCC Speaker Cone

The Niles CM8SW is a high-performance passive subwoofer that compliments the entire Niles ceiling mount loudspeaker line. It’s dual voice-coil injection molded TCC (talc, carbon and ceramic) woofer provides outstanding bass response

High-Power Handling

The CM8SW employs an exceptionally heavy-duty magnet/voice-coil/spider assembly that is capable of handling high power amplifiers (up to 150 watts).

Features and Benefits

The illustration below shows how	New Construction Bracket serves as	Figure 1
a typical Niles CM loudspeaker	a “hole saver” when drywall has not	Model CM8SW Shown
mounts into a ceiling.	been applied. It is not necessary when
	retrofitting to existing ceilings.
Knockout wire tie allows
the wire to be secured to
the bracket throughout the
new construction process.
It knocks out cleanly when
the speaker is installed.
New construction
wings instantly snap
into the bracket
without screws.
		Dogs swivel 90°, then
		clamp the speaker
		frame to the drywall.
		Frames are molded with
		a slight texture to assure
		good paint adhesion.

Wings are scored for	Mounting screws tighten
easy size trimming.	the “Dogs”, clamping the
	speaker to the drywall
Brackets and wings
attach to the ceiling joists	Rust-proof aluminum Grilles make the
with nails or screws.	CM8SW series perfect for moist
	environments.

Figure 2		Figure 3
	FULL SAT CUT		100Hz SUB 140Hz
The CM8SW ceiling mount subwoofer includes an		The CM8SW ceiling mount subwoofer includes
easy access, baffle mounted high pass filter to		an easy access, baffle mounted low pass fre-
prevent over-excursion of the satellite’s woofers.		quency selection switch.

2