www.nilesaudio.com
TV Settings
This section is used to specify if your DMS4 Digital Music Server is configured for PAL or NTSC use.
enabled if you are using a plasma or rear projection television to display the user interface.
System Information
The System Information screen displays information about the configuration of your DMS4 Digital Music Server, such as the serial number and the version number of the software currently running.
Fig.
Note: your DMS4 Digital Music Server will be set to NTSC by default. You may need to amend this setting if the TV user interface is not displayed, or displayed incorrectly on your television screen.
User Interface Settings
The options on this menu allow you to change the settings that affect the way the user interface is displayed.
Fig.
By default, your DMS4 Digital Music Server will be in Passive mode; changing to Active will add icons to the interface depicting the available options on each screen.
This screen also allows you to enable or disable the hints that appear at the bottom of some of the screens and the button pulse when an option is selected.
In addition, you can also enable or disable Auto Output. This option dictates whether a remote control specifically programmed to control a particular audio output will automatically switch the DMS4 Digital Music Server to control the assigned output when a button is pressed on the remote control. For more information about using this feature, see the section entitled Remote Control Use in a
The Screensaver
The DMS4 Digital Music Server is equipped with a screensaver which will activate when the unit remains idle for a specified period of time. On this screen, you may choose to disable the screen saver or alter the time delay before it activates.
Note: It is strongly recommended that you leave the screensaver
Fig.
You may need to quote this information if you contact your dealer or installer for technical support.
On this screen there is a also a Reset System option available by pressing the M key on the remote control. Select this option and press the OReset Defaults key to return your DMS4 Digital Music Server to its default factory settings. You can also choose the MClear Content option to remove all the music from your Audio Library.
If you choose to clear all the content from your Audio Library you will be asked to enter a password to confirm your action. The password is ResetMyMusic.
Note: If you perform either of the above two actions, you will not be able to reverse their effects.
Software Update Settings
In the unlikely event that a software update attempt fails, you may need to amend these settings. If this scenario arises, contact your dealer or installer for more information.
Fig.
Network Back Up Settings
This screen allows you to specify Username, Password and Network Location for performing a Back Up operation.
35