Niles Audio HPS-4/HPS-6 specifications Features and Benefits, Constant Protection Switch

H I G H P O W E R S P E A K E R S E L E C T I O N S Y S T E M

H I G H P O W E R S P E A K E R S E L E C T I O N S Y S T E M

6.To turn off one or more speaker pairs, simply press the corresponding on/off button(s) on the speaker selector. Refer to the protection chart for the correct setting of the Protection button.

Constant Protection Switch

The HPS-4/HPS-6 is equipped with a manual override for the protection circuit that enables you to defeat the front panel protection switch and maintain constant impedance protec- tion. This will safeguard your amplifier from being overdriven due to accidental or improper use by anyone unfamiliar with the equipment.

To engage this override, move the rear panel “Constant Protection” switch to the “On” position. Constant imped- ance protection will be maintained until the switch is turned to “Off”.

Features and Benefits

The HPS-4 and HPS-6 offer a number of improvements over other speaker selectors:

•Power handling: 250 watts per channel RMS

•Protection circuit safeguards receiver/amplifier

•Separate left and right ground paths for compatibility with all amplifiers

•Rear-panel switch for constant or selectable impedance protection

•Removable connectors accommodate up to 12 gauge wire

•Rugged all metal chassis construction

•Non-skid feet won’t scratch furniture and ensure unit stability during operation

•72 adhesive-backed room identification labels

•Requires an amplifier that is compatible with a 4 ohm load

•Warranty: Ten-year limited

•Dimensions: 17" wide x 2" high x 8-5/8" deep

•Shipping weight: approximately 7 lbs

TECH

SUPPORT

HOTLINE

If you have questions regarding the opera- tion of the Niles HPS series, contact your local Niles dealer or Niles Technical Support at 1-800-289-4434.

13 2