Niles Audio HPS-4/HPS-6 Operation, Playing One Pair of Speakers At a Time, Receiver, Niles HPS-4

H I G H P O W E R S P E A K E R S E L E C T I O N S Y S T E M

Receiver

TUNER 94.9	Figure 2
	Wiring Diagram
15

		Niles HPS-4
Niles Audio Corporation Miami, Florida USA
AMPLIFIER	SPEAKER 4	SPEAKER 3	SPEAKER 2	SPEAKER 1
ON OFF

CONSTANT

PROTECTION

Speaker	Speaker	Speaker	Speaker
Pair 4	Pair 3	Pair 2	Pair 1

H I G H P O W E R S P E A K E R S E L E C T I O N S Y S T E M

Operation

There are two ways to use the HPS-4/HPS-6. You may play one pair of speakers at a time, or play multiple pairs simultaneously.

If you intend to play more than one pair of speakers at the same time, you will need to become familiar with the opera- tion of the PROTECTION button.

Playing One Pair of Speakers At a Time

1.Make sure the amplifier or receiver power is OFF and set the volume to minimum.

2.Locate the on/off button on the HPS-4/HPS-6 which corre- sponds to the speaker pair you wish to play. Set it to the ON position (Engaged).

3.Turn on the amplifier or receiver and select a source, such as the tuner or CD player.

4.Slowly turn up the amplifier or receiver volume and set it to a comfortable (not maximum) listening level. Be careful not to overdrive or “clip” your amplifier. If the sound becomes muddy or distorted, you have reached the limit of your amplifier's volume capability and should quickly reduce the volume to avoid damaging your speakers.

5.To turn off the speaker pair, simply press the corresponding on/off button on the HPS-4/HPS-6.

9 6