P 13/17
Wiring diagram
[1] Routing Wires Through Handle Base and Handle
Be careful not to pinch the Lead wires with the ribs. (Figs.
Fig. D-2
| Do not to put the Lead wire (clear) |
Handle base | of Noise suppressor on these ribs. |
| |
|
Handle
Handle cover Controller
Noise suppressor (if used)
Handle base, viewed from Controller side
Through hole for passing Lead wires from Controller and Connector housing to the opposite side
Through hole for passing Grounding (Earth) wire from the opposite side
Do not put the Lead wires on this rib or they will be pinched between the rib and Handle.
Do not to put the Lead wires on these ribs or they will be pinched between the ribs and Motor housing.
Fig. D-3
Handle,
viewed from Handle cover side
Through hole for passing Lead wires to the opposite side
Do not to put the Lead wires on this rib or they will be pinched between the rib and Handle cover.
