4
PACKAGE CONTENTS
nIR-CB2 x 1
nSnap and Lock Connectors x 2
nIn-line power supply x 1
nSelf-adhesive rubber feet x 4
nIR-SMR Receiver x 1
nAdhesive-backed strip for mounting x 1
nIR-E1 Emitters x 5
nIR Blocking Covers x 5
nExtra emitter adhesive strips x 10
PREPARING FOR INSTALLATION
The IR Receiver cables, emitter cables and the 12V
DC power supply cable must all reach the proposed
location of the IR-CB2 Connecting Block. Mark the
cables with wire labels, describing where the cables
originate from, rather than where they will terminate.
Locate a local un-switched AC outlet to be used to
power the IR-CB2 power supply.
Tools Required
n1/8" Slotted screwdriver
nWire labels
nWire stripper