Niles Audio IR-KIT manual

1.12V DC Jack – Provides 12Volt DC power to IR-CB2 via a regulated power supply.

2.IR Emitter Outputs – 3.5mm jacks provide output for either single or dual low-level flashers.

3.3-30V AC/DC Status – 3.5mm jack provides system status to sensors/keypads via a 12V power supply attached to a switched outlet on the system receiver or a 12V trigger output.

4.12V Output – When 12V DC is detected at the status jack (#3) the 12V output jack will output 12V/200mA DC. This is useful for triggering external devices and system automation.

5.Status/IR Confirmation LED – This LED performs two functions: (1) it provides a visible indication of system status via a green LED and (2) confirms the reception of IR data via a blinking blue LED.

6.Emitter Hi/Low switch – Setting these switches to the appropriate position allows you to connect either a high-output flooding emitter (IR-E1HO) or low-output emitter. There is one Hi/Low switch for emitter port four and one Hi/Low switch for emitter port five.

7.Sensor Inputs – Removable quick connect sensor plug for connection of IR sensors to the system.

3