INSTALLATION (CONTINUED)

Start by examining all the possible routes you might take to run the Microsensor cable from the sensor location to the A/V components to be controlled. Use a stud sensor or other device to locate the internal structure of the wall. You want to avoid all studs or joists. A typical route would be from the Microsensor location up the inside of the wall to a new hole drilled into the top “plate” (horizontal 2 x 4 at the top of the inside of the wall), into the attic crawl space, then down another plate to the wall behind the stereo system itself. The other very common route is through the bottom plate of the wall into an unfinished basement or crawl space.

Identify where all of your electrical, phone, and TV wiring is likely to be and plan to route around it all. You can accidentally induce interference on your sensor cable right beside electrical cable for more than a few feet. Try to keep sensor cable running parallel to power cables at least 3 feet away. To find exactly where an electrical cable is routed, try inspecting the inside of the wall by turning off the breaker for a particular power outlet or switch, removing the cover plate and switch or receptacle, and shining a penlight into the wall. If you have access to an attic or basement space, you can see which part of the wall space is free of obstructions (Figure 13).

When you don’t have access above or below the wall, try to estimate the existing cable and pipe locations from the positions of electrical outlets and plumbing fixtures on both sides of the wall. Also, take a look at the outside of your house, sometimes a conduit, vent or drain pipe will be visible and will offer useful information. Choose the route with the fewest potential obstacles. If your house is built on a slab or you are wiring between two finished floors, look for baseboards which could be removed and replaced with the cable behind them. Doorjambs can be removed and often have enough space for sensor cable all the way around the door (Figure 14).

16

Page 18
Image 18
Niles Audio RCA-SM manual Installation

RCA-SM specifications

Niles Audio has been at the forefront of audio technology for years, and the RCA-SM is a testament to their commitment to high-quality sound reproduction and innovative design. The RCA-SM, which stands for RCA Speaker Module, is an engineered solution for users seeking to enhance their home audio systems without the clutter of traditional speakers.

One of the main features of the RCA-SM is its compact and sleek design. This module is designed to be installed unobtrusively within walls or ceilings, allowing for a clean aesthetic while delivering powerful sound. Its in-wall design also enables seamless integration into your home environment, making it an ideal choice for homeowners looking to maintain a minimalist aesthetic while enjoying rich audio.

The RCA-SM employs advanced technologies to optimize sound quality. The speaker module is equipped with high-fidelity drivers that ensure clear highs, deep lows, and an overall balanced audio experience. This is further enhanced by the use of a specialized crossover network, which effectively splits audio signals into different frequency ranges, allowing each driver to perform at its best.

Additionally, the RCA-SM features a rugged construction designed to withstand the rigors of everyday use. Its materials are selected not only for durability but also for their acoustic properties, contributing to a more natural and realistic sound. The speaker’s enclosure is carefully engineered to minimize resonance and distortion, ensuring that users receive crisp and clear audio reproduction.

Compatibility is another key characteristic of the RCA-SM. This module is designed to work seamlessly with various home audio systems, whether they are traditional stereo setups or more complex surround sound systems. Niles Audio has ensured that the RCA-SM can easily integrate with other components, providing flexibility for both custom installations and upgrades.

In summary, the Niles Audio RCA-SM is an exemplary choice for anyone looking to enhance their audio experience without sacrificing design or functionality. With its high-quality drivers, intelligent crossover technology, rugged construction, and versatile compatibility, it represents a significant advancement in the realm of in-wall speakers, paving the way for exceptional sound within any home environment.