INSTALLATION

4.Connect one stripped end of the speaker cable coming from the amplifier to the RS6 connection cable’s red wire. To connect the two wires, twist the stripped ends of the wire together and screw down the wire nut on the twisted wires. The material inside the wire nut will protect the stripped ends of the wire. However, if added protection is desired, place a large amount of silicon sealant so the bottom of the wire nut is encased and sealed. Pay attention to the markings on the speaker cable. Each loudspeaker you connect must be connected to the amplifier’s speaker wire in the same way.

5.Repeat step 4 with the RS6 connection cable’s black wire and the other stripped amplifier speaker cable’s conductor.

6.Connect the opposite end of the speaker cable to the amplifier or receiver. Start by performing step 1 and 2 on the speaker cable near the amplifier. Paying attention to the markings on the speaker cable conductor, attach the same conductor you attached to the red loudspeaker wire to the positive (red) or (+) amplifier output terminal. Attach the other conductor to the amplifier’s negative (black) or (–) amplifier output terminal.

Figure 6 Speaker wire preparation

Speaker Phase

Speaker wire has two conductors. One conductor is attached to the negative (black) or (-) terminals and one conductor is attached to the positive (red) or (+) terminals of both the loudspeaker and the amplifier. Usually, the wire is marked for your convenience. There are different ways to mark the conductor; a stripe on one wire, a ribbed area on one conductor that you can feel, different color metal conductor wire inside the insulation, the insulation covering the conductor might be different colors, or there might be a fabric string wound onto one of the conductors. Of course some cables make it difficult to determine which conductor is which. Be careful to avoid mistakes. If you do, one loudspeaker will be playing out of “phase” with the other loudspeaker. An out of phase pair of speakers work against each other and the sound of the two speakers playing together will be lacking in bass response and have a “phasey”sound quality. If you suspect the sound is not right, check to make sure that the conductors on each loudspeaker are attached the same on the loudspeaker and the amplifier. If you cannot see any markings or determine if they are all attached the same, try this simple test:

11

Page 11 Page 13
Page 12
Image 12
Niles Audio RS6 Series manual Speaker wire preparation, Speaker Phase
Page 11 Page 13

RS6 Series specifications

Niles Audio RS6 Series loudspeakers are designed to provide exceptional sound quality and versatility for custom installation in residential and commercial settings. These speakers are an excellent choice for those looking to enhance their audio experience without compromising on aesthetics.

One of the standout features of the RS6 Series is its sophisticated design that allows for seamless integration into any environment. The speakers are available in various finishes, enabling them to match or complement existing decor effortlessly. Equipped with a low-profile grille, the RS6 speakers can blend unobtrusively into walls or ceilings, making them an appealing option for those who favor a clean, modern look.

The RS6 Series incorporates high-quality components that ensure clear and accurate audio reproduction. The speakers utilize a combination of high-performance woofers and tweeters, providing a balanced sound profile suitable for various audio applications. Whether used for music playback, home theater systems, or multi-room audio setups, the RS6 Series consistently delivers robust performance.

One of the significant advancements in the RS6 Series is its use of advanced technologies, such as the Dynamic Response Technology. This innovation enables the speakers to produce a wide dynamic range, ensuring that soft passages in music are heard with clarity while still maintaining the power needed for more energetic sounds. The result is an immersive listening experience that captures the full spectrum of sound.

Another notable characteristic of the RS6 Series is its impressive power handling capabilities. With the ability to handle a wide range of amplifier power, these speakers can accommodate different audio setups, from casual listening to high-intensity home theater applications. This flexibility makes the RS6 an ideal choice for both audiophiles and casual listeners alike.

The RS6 Series also features an innovative mounting system that simplifies installation, making it easy to integrate them into custom home audio setups. With adjustable mounting options, installers can quickly position the speakers for optimal sound performance without extensive modifications.

In summary, the Niles Audio RS6 Series loudspeakers combine elegant design, advanced sound technologies, and flexibility in installation to create an impressive audio solution for a variety of settings. Whether for a dedicated home theater or a multi-room audio system, the RS6 Series stands out as a top choice for those seeking quality sound and aesthetic harmony.
Top Page Image Contents