3.Choose the speaker cable that is labeled for the “Right” amplifier channel. Connect one stripped end of the “Right” speaker cable coming from the amplifier to the RS8Si connection cable’s red wire. To connect the two wires, twist the stripped ends of the wire together and screw down the wire nut on the twisted wires. The material inside the wire nut will protect the stripped ends of the wire. However, if added protection is desired, place a large amount of silicon sealant so the bottom of the wire nut is encased and sealed. Pay attention to the markings on the speaker cable. Each loudspeaker you connect must be connected to the amplifier’s speaker wire in the same way.

4.Repeat step 3 with the RS8Si connection cable’s black wire, that is in the same conductor as the wire attached in step 3, and the other stripped amplifier “Right” speaker cable’s conductor.

5.Repeat steps 3 and 4 for the “Left” speaker cable and the RS8Si’s connection cable with the “yellow/black” pair of conductors.

6.Connect the opposite end of the speaker cable to the amplifier or receiver. Start by performing step 1 and 2 on the speaker cable near the amplifier. Pay attention to the markings on the speaker cable conductor. Use the cable labeled “Right”and attach the same conductor you attached to the red loudspeaker wire to the positive (red) or (+) “Right” amplifier output terminal. Attach the other conductor in that cable to the amplifier’s “Right” negative (black) or (–) amplifier output terminal.

7.Using the cable labeled “Left” attach the same conductor you attached to the yellow loudspeaker wire to the positive (red) or (+) “Left” amplifier output terminal. Attach the other conductor in that cable to the amplifier’s “Left” negative (black) or (–) amplifier output terminal.

Connecting the loudspeaker in two-speaker stereo mode

1.Strip two to three inches of the speaker cables’ outer jacket away from the insulated conductors. Ensure that at least two inches of the separate conductors are free. Do this on both loudspeaker connection cables.

2.Strip one half inch of insulation from the end of each conductor as show in Figure 6 for both connection cables.

Figure 6 Speaker wire preparation

INSTALLATION

12

Page 12 Page 14
Page 13
Image 13
Niles Audio GRANITE RS8SI, SANDSTONE RS8SI Connecting the loudspeaker in two-speaker stereo mode, Speaker wire preparation
Page 12 Page 14

CORAL RS8SI, GRANITE RS8SI, SANDSTONE RS8SI specifications

Niles Audio has long been a trusted name in the realm of outdoor and landscape speakers, and their latest offerings, the SANDSTONE RS8SI, GRANITE RS8SI, and CORAL RS8SI, continue to embody this legacy. Designed with both aesthetics and acoustics in mind, these speakers provide exceptional sound quality while seamlessly blending into their natural surroundings.

The SANDSTONE RS8SI features a unique sandstone texture that mimics natural rock, making it an excellent choice for gardens or patios. With an 8-inch polypropylene woofer and a 1-inch dome tweeter, this model delivers clear, powerful sound across a wide frequency range. Its frequency response spans from 40 Hz to 20 kHz, ensuring that both deep bass and high treble notes are reproduced accurately.

Similarly, the GRANITE RS8SI offers a robust granite-like finish that withstands the elements while providing high-quality audio performance. This model is also equipped with an 8-inch woofer and a 1-inch tweeter, ensuring it can fill outdoor spaces with rich sound. Its weather-resistant design and durable construction make it perfect for any outdoor setting, whether by the pool or in the backyard.

On the other hand, the CORAL RS8SI stands out with its coral stone aesthetic. This speaker features the same powerful woofer and tweeter combination, delivering a remarkable listening experience. All three models are equipped with advanced technologies such as high-efficiency drivers and wide dispersion, allowing for a more immersive sound experience without the need for multiple speakers.

One of the key characteristics of the Niles Audio outdoor speakers is their ability to blend into the environment effortlessly. With a selection of finishes that emulate natural stone, these speakers not only sound fantastic but also enhance the overall aesthetic of outdoor spaces. Furthermore, each speaker is designed for easy installation and can be used in a variety of configurations to suit any landscape.

In summary, the Niles Audio SANDSTONE RS8SI, GRANITE RS8SI, and CORAL RS8SI offer a perfect combination of beauty and performance. With their robust construction, high-quality sound, and nature-inspired designs, these outdoor speakers are ideal for anyone looking to enjoy their favorite music in an outdoor setting. Investing in these speakers is a step towards creating an unmatched auditory experience that can be cherished in any garden, patio, or backyard.
Top Page Image Contents