| | | | | | | | | | | | | | | | | | | | | | | | | | | | | INSTALLATION |
Niles SI-2125 | | | | | | | | | | | | | Niles HDL-6 Speaker Selection System | CONSIDERATIONS |
| | | | | | | | | | | | |
| | AMPLIFIER | | | SPEAKER 6 | | | SPEAKER 5 | | | SPEAKER 4 | | | SPEAKER 3 | | | SPEAKER 2 | | | SPEAKER 1 | | |
| L+ | L- | R- | R+ | L+ | L- | R- | R+ | L+ | L- | R- | R+ | L+ | L- | R- | R+ | L+ | L- | R- | R+ | L+ | L- | R- | R+ | L+ | L- | R- | R+ | |
NILES | ON OFF | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
CONSTANT | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
Niles Audio | PROTECTION | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
Corporation, Inc. | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
Miami, Florida USA | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
Speaker selection systems allow each pair of speakers to be turned on and off from your equipment location (or even via remote control).
Cable and Wire
It will be easier to reconfigure or troubleshoot your system in the future if you label the cables and wires for their destination or source, rather than which terminal of the SI-2125 they are connected to.
The SI-2125 connects to your sources via shielded line level audio cables with RCA phono plugs. Use high quality cables with your Niles amplifier for the lowest possible noise and best overall performance. Your Niles dealer can recommend the proper cable.
The SI-2125 connects to your speakers using 2 conductor speaker wire. For most applications, we recommend you use 16 or 18 gauge wire. For wiring runs longer than 80 feet, we recommend 14 gauge wire. The binding posts of the SI-2125 will accommodate up to 12 gauge wire. Larger sizes can be accommodated by attaching banana plugs to the wire. Note that the binding posts accept dual banana or single banana connectors.
