Compaq EVO M800w, EVO M800c, EVO M80v Reverse the above procedures to install a MultiBay device

Removal and Replacement Procedures

5.Remove the MultiBay device by following these steps:

a.Turn the computer bottom side up with the right side facing forward.

b.Slide and hold the MultiBay release latch toward the front of the computer 1 (Figure 5-4).

c.Use the notch in the MultiBay device to slide the device out of the MultiBay 2.

d.Remove the MultiBay device.

Figure 5-4. Removing a MultiBay Device

Reverse the above procedures to install a MultiBay device.

5–6 Maintenance and Service Guide