Compaq EVO M80v, EVO M800w, EVO M800c manual Reverse the above procedure to install the system board

Removal and Replacement Procedures

7.Use the MultiBay connector 1 to lift 2 the front of the system board until the board rests at an angle (Figure 5-35).

8.Slide the system board forward at an angle 3 and remove it from the base enclosure.

9.Remove the PC Card bezel 4 from the system board.

Figure 5-35. Removing the System Board

Reverse the above procedure to install the system board.

5–48 Maintenance and Service Guide