Compaq EVO M800c, EVO M800w, EVO M80v, N800v, N800C manual Removing the System Board Screws

Removal and Replacement Procedures

5.Remove the two PM2.0 × 5.5 screws 1 that secure the system board to the base enclosure on either side of the MultiBay connector (Figure 5-34).

6.Remove the two PM2.0 × 8.0 screws 2 that secure the system board to the base enclosure through the processor support bracket.

Figure 5-34. Removing the System Board Screws

Maintenance and Service Guide 5–47