Compaq EVO M800c, EVO M800w, EVO M80v Reverse the above procedure to install the speaker assembly

Removal and Replacement Procedures

3.Route the drive activity light/battery power light cable and speaker cable out of the retaining clips in the top cover 1 and 2 (Figure 5-25).

4.Remove the strip of tape 3 that secures the speaker assembly and TouchPad cables to the top cover and TouchPad assembly.

5.Remove the PM2.0 × 4.0 screw 4 that secures the speaker assembly to the top cover.

6.Lift the speaker assembly straight up 5 and remove it from the top cover.

Figure 5-25. Removing the Speaker Assembly

Reverse the above procedure to install the speaker assembly.

5–32 Maintenance and Service Guide