Compaq N800v, EVO M800w, N800C Preparing the Computer for Disassembly, Removing the Battery Pack

Removal and Replacement Procedures

5.3Preparing the Computer for Disassembly

Perform the following steps before disassembling the computer:

1.Turn off the computer.

2.Disconnect the AC adapter and all external devices.

3.Remove the battery pack by following these steps:

a.Turn the computer bottom side up with the left side facing forward.

b.Slide and hold the battery release latch 1 toward the back of the computer (Figure 5-2).

c.Use the notch in the battery bay to slide the battery pack out of the battery bay 2.

d.Remove the battery pack.

Figure 5-2. Removing the Battery Pack

Reverse the above procedures to install the battery pack.

5–4 Maintenance and Service Guide