Compaq EVO M800c, EVO M800w, EVO M80v, N800v, N800C manual Removing the Top Cover Screws

Removal and Replacement Procedures

3.Remove the nine PM2.0 × 8.0 screws 1 securing the top cover to the base enclosure (Figure 5-21).

4.Remove the PM2.0 × 4.0 screw 2 securing the top cover to the base enclosure in the hard drive bay.

✎Do not remove the screw in the middle of the hard drive bay 3.

Figure 5-21. Removing the Top Cover Screws

5.Turn the computer top side up with the rear panel facing forward.

Maintenance and Service Guide 5–27