Nilfisk-Advance America BRV 900 A-2 /ENGLISH, Table Of Contents, Introduction, Parts And Service

A-2 / ENGLISH

TABLE OF CONTENTS

	Page
Introduction	A-2
Cautions and Warnings	A-3
Know Your Machine	A-4 – A-5
Control Panel	A-6
Prepare the Machine for Use
Install the Batteries	A-7
Install the Brushes	A-8
Install the Filter Bag	A-9
Operating the Machine
Vacuuming	A-10
Using the Wand	A-10
After Use	A-12
Maintenance Schedule	A-12
Lubricating the Machine	A-12
HEPA Filter Maintenance	A-12
Charging the Batteries (Wet)	A-13
Check the Battery Water Level	A-13
Charging the Batteries (Gel)	A-13
Side Broom Maintenance	A-14
Troubleshooting	A-15
Technical Specifications	A-15

INTRODUCTION

This manual will help you get the most from your Nilfisk BRV 900 (rider vacuum). Read it thoroughly before operating the machine.

Note: Bold numbers in parentheses indicate an item illustrated on pages A-4 – A-6.

This product is intended for commercial use only.

PARTS AND SERVICE

Repairs, when required, should be performed by your Authorized Nilfisk Service Center, who employs factory trained service personnel, and maintains an inventory of Nilfisk original replacement parts and accessories.

Call the NILFISK DEALER named below for repair parts or service. Please specify the Model and Serial Number when discussing your machine.

(Dealer, affix service sticker here.)

NAME PLATE

The Model Number and Serial Number of your machine are shown on the Nameplate on the machine. This information is needed when ordering repair parts for the machine. Use the space below to note the Model Number and Serial Number of your machine for future reference.

MODEL NUMBER ______________________________________________________

SERIAL NUMBER ______________________________________________________

UNCRATE THE MACHINE

When the machine is delivered, carefully inspect the shipping packaging and the machine for damage. If damage is evident, save the shipping carton (if applicable) so that it can be inspected. Contact the Nilfisk Customer Service Department immediately to file a freight damage claim. Refer to the unpacking instruction sheet included with the machine to remove the machine from the pallet.

A-2- FORM NO. 56041806 - BRV 900