4
CENTIX 60
CENTIX 60 PREMIUM
english 2 Description
2.1 Operating elements See fold-out page at the front of
these operating instructions.
1 Handle with cable hook
2 Accessory holder
3 Cleaner switch
4 Retaining clamp
5 Dirt tank
6 Grip to empty tank
7 Inlet fitting
8 Plug for mobile operation
9 Waste air connection
3 Before start-up3.1 Assembling the cleaner
1. The mains plug should not
be inserted into a socket.
2. Open the retaining clamps
(1) and lift off the upper sec-
tion of the cleaner.
3. Take the accessories out
of the dirt tank and the pa-
ckaging.
4. Place a filter bag into the
tank as described in the
instructions (printed on the
filter bag).
IMPORTANT: Press the filter
bag connection firmly on to
the inlet fitting.
5. Fit the upper section of the
cleaner and close the retai-
ning clamps, taking care not
to damage the filter bag.
NOTE: Ensure that the retai-
ning clamps fit properly.
3.2 Fixing wall bracket At the installation site:
1. Screw the holding bar on to
the rear of the suction unit.
2. Fix the wall bracket on the
wall.
3. Hang the cleaner on the wall
bracket.