6
CENTIX 60
CENTIX 60 PREMIUM
english
0
1
0
1
1
1
4.2 Operation on central
extraction system
Connect only plugs to the clea-
ner socket that have been ap-
proved by Alto.
1. Ensure that
– the cleaner is switched
off
– the suction sockets are
not activated.
2. Connect the plug of the cen-
tral extraction system (1) to
the control panel.
3. Turn the switch to position
„I“.
4. Insert the suction hose in the
suction socket.
CENTIX 60:
The vacuum cleaner motor
starts.
5. CENTIX 60 PREMIUM:
Switch the suction motor on
and off at the switch (2) on
the suction pipe handle.
4.3 Mobile operation
4.3.1 Changing suction hose
for mobile operation
CENTIX 60:
1. Unscrew suction hose bush
(ø 32 mm) from the suction
hose (left thread).
2. Screw ø32/50 mm bush (1)
on to one end of the suction
hose (left-handed thread).
CENTIX 60 PREMIUM:
1. Use the suction hose sup-
plied for mobile operation.
4.3.2 Switching on cleaner Connect only plugs to the clea-
ner socket that have been ap-
proved by Alto.
1. Ensure that the tool is swit-
ched off.
2. Insert the plug for mobile
operation (1) into the cleaner
socket.
3. Connect the suction hose to
the inlet fitting (1).
4. Turn the switch to position
„I“.
The vacuum cleaner motor
starts.
2