Poseidon 2
3.4Mounting of quick coupling
3.5Mounting of high pressure hose
1.Screw the quick coupling tight on to the water inlet (2).
Note: The inlet fi lter must al- ways be fi tted in the water inlet pipe to filter out sand, limestone and other impurities as these will damage the pump valves.
Caution: Failure to fi t the fi lter will
invalidate the guarantee.
Attach the high pressure hose
(4) to the spray handle (7).
4 Operating your pressure washer
4.1Connection of high pres- sure hose
Machines without hose reel: At- tach the high pressure hose (4) to the high pressure connection of the machine (3).
Only max. 7 m additional exten- sion hose can be added.
Machines with hose reel: Un- wind the high pressure hose completely.
66 | Original Instructions |
