Nilfisk-ALTO 2 manual Mounting of spray lance, Water connection Telescopic handle

4.2Mounting of spray lance

A

B

Poseidon 2

1.Pull the blue quick-release grip (A) of the spray gun backwards.

2.Insert the nipple of the spray lance (B) into the quick-re- lease connection and release it.

3.Pull the spray lance (or other accessory) forwards to check that it is securely attached to the spray gun.

4.3Water connection

4.4 Telescopic handle

NOTE!

Always remove any dirt from the nipple before connecting the spray lance to the spray handle.

An ordinary 1/2" garden hose of min. 10 m and max. 25 m will be suitable.

NOTE: Connec- tion to the public mains according to regulations.

IMPORTANT! Only use wa- ter without any impurities. If there is a risk of silt, sand or sediment in the inlet water (i.e. from your own well), an addi- tional filter should be mounted.

1.Let the water run through the water hose before connecting it to the machine to prevent sand and dirt from penetrat- ing the machine.

Note: Check that the filter is

fitted in the water inlet pipe and that it is clean and free from debris.

2.Connect the water hose to the water supply by means of the quick connector (inlet water, max. pressure: 10 bar, max. temperature: 60°C).

3.Turn on the water.

The machine features a tele- scopic handle. To raise or lower the handle, press the button

(16)and move the handle up- wards or downwards. When a click is heard, the handle is in right position.

Original Instructions 67