Nilfisk-ALTO 571, 586 manual Introduction & Machine Specifications

Introduction

Introduction & Machine Specifications

This is a floor cleaning machine which, using the mechanic abrasive action of brushes or pads and the chemical action of a water- detergent solution, is able to clean any type of floor. During its forward movement, it picks up the removed dirt and the detergent solution which has not been absorbed by the floor.

Model	SCRUBTEC R 571	SCRUBTEC R 586	SCRUBTEC R 571 C	SCRUBTEC BOOST® R
Part Number	00318F	00319F	00343F	00344F
Cleaning Swath	28” (71.1 cm)	34” (86.4 cm)	28” (71.1 cm)	32” (81.3 cm)
Power Supply	36 volt system using (6) 6 volt 250, 330, or 370 AH deep cycle batteries
Battery Charger	On-Board fully automatic smart charger, 115V 60 Hz or 230V 50 Hz
Brush Motors	(1) 2 hp (1.5 kW) driving	(1) 2.5 hp (1.9 kW) driving	(2) .75 hp (.56 kW)	(1) .75 hp (.56 kW)
	two right angle gearboxes	two right angle gearboxes
Brush Size / Speed	(2) 14” (36 cm) 300 RPM	(2) 17” (43 cm) 300 RPM	(2) 6 x 28” (15.2 x 71.1	(1) 14 x 32” (35.6 x 81.3
			cm) 300 RPM	cm) 2250 RPM
Brush Pressure	12 -225 lbs. (57-102 kg)		90-130 lbs. (41-59 kg)	115-155 lbs. (52-70 kg)
Traverse Speed (max)		4.1 mph (6.6 kph)
Traverse	1.5 hp (1.1 kW) transaxle powering of two 10” (25.4 cm) diameter rear wheels
Max. Cleaning Grade		6 degree
Vacuum Motor		1 hp (.75 kW) 3 stage tangential discharge
Noise Level		70 dBA
Solution Tank		30 gallon (113 liter)
Recovery Tank		30 gallon (113 liter)
Length		65” (165 cm)
Width	33” (84 cm)	35.5” (90 cm)	30” (130 cm)	33” (84 cm)
Height		56” (142cm)
Machine Weight
w/330 AH batteries	1478 lbs. (670 kg)	1498 lbs. (679 kg)	1498 lbs. (679 kg)	1488 lbs. (675 kg)
& full of solution
Warranty	8 years PolydurTM tanks, 3 years parts, 1 year labor, 18 months pro-rated batteries

Nilfisk ALTO Operator’s Manual - SCRUBTEC R Manual Steering Form No. 71274A Page -5-