Nilfisk-ALTO 571, 586 manual How To Prepare the Machine For Operation

How To Prepare the Machine For Operation

How To Install The Brush Or Pad on the BOOST machine

To install the brush or pad on the BOOST machine, follow this pro- cedure:

1.Turn the key switch “ON”.

2.Put the brush switch in the “UP” position.

3.Turn the key switch “OFF”.

4.Go to the side of the machine.

5.Press on a brush or pad under the flex plates. See figure 15.

NOTE: When using a black pad, position pad on head. Lower head and operate momentarily to affix pad to pad driver (if you have difficulty, position pad on

floor and lower head then operate.)

How To Remove The Brush Or Pad on the BOOST machine

To remove the brush or pad from the machine, follow this proce- dure:

1.Turn the key switch “ON”.

2.Put the brush switch in the “UP” position.

3.Turn the key switch “OFF”.

4.Go to the side of the machine.

5.Pull downward on the brush or pad until it releases from the flex plates. See figure 16.

Figure 15

Figure 16

Nilfisk ALTO Operator’s Manual - SCRUBTEC R Manual Steering Form No. 71274A Page -15-