Mounting | Radar Tank Gauge |
|
|
3.4.6Mounting with Pivoting element
Installation tips
The Pivoting element serves to swivel the 7500 RTG from the measuring position, e.g. to clean the antenna or dip the tank.
The pivoting element is not part of the standard offering from Varec, special offers available under ref. number MVTFM0422.
3.5Post-installation check
After the measuring instrument has been installed, perform the following checks:
•Is the measuring instrument damaged (visual check)?
•Does the measuring instrument correspond to the measuring point specifications such as process temperature/pressure, ambient temperature, measuring range, etc.?
•Is the flange marking correctly aligned? (see page 11)
•Have the flange screws been tightened up with the respective tightening torque?
•Are the measuring point number and labeling correct (visual check)?
•Is the measuring instrument adequately protected against rain and direct sunlight
(see page 75)?
24 | Installation and Operations Manual |
