7532

Wiring

Wiring with Tank Side Monitor 4590

Tank Side Monitor 4590 TSM

"

Before connection please note the following:

● The power supply must be identical to the data on the

Caution! nameplate (1).

● Switch off power supply before connecting up the device.

1

 

● Connect Equipotential bonding to transmitter ground terminal before connecting up the device.

●Tighten the locking screw:

It forms the connection between the antenna and the housing ground potential.

When you use the measuring system in hazardous areas, make sure you comply with national standards and the specifications in the safety instructions (XA’s).

Make sure you use the specified cable gland.

Connect up the 7500 RTG as follows:

-Before unscrew housing cover (2) at seperate connection room turn off the power supply!

●Insert cable through gland (3). Use screened, twisted wire pair.

●Make connection (see pin assignment).

●Tighten cable gland (4).

●Screw off housing cover (2).

●Switch on power supply.

2

4

3

intrinsicaly safe terminal board

16D+

17S+

18S-

19

D-

20OPT1

21OPT2

22OPT3

23OPT4

+

24H

25-

+

26H

27-

28+

29-H

+

30P

31-

grounding single sided on Tank Side Monitor 4590 TSM

Internally

HART interconnected sensor as one HART

fieldbus loop

+4 - 3

+2 - 1

For Micropilot only for

S-series only! 7500 RTG

1 2 3 4 5

1 2 3 4 5

grounding not on 7500 RTG

1 2 3 4

plant ground

The 7500 RTG is - possibly in combination with other devices - connected to a Tank Side Monitor in a hazardous area. In this case, it is recommended that you ground the cable screen centrally at the Tank Side Monitor and connect all devices to the same potential matching line (PML). If, for functional reasons, a capacitive coupling is required between local earth and screen (multiple grounding), ceramic condensers with a dielectric strength of min. 1500 Veff must be used, whereby the total capacitance of 10 nF must not be exceeded. Notes on grounding interconnected intrinsically safe devices are provided by the FISCO model

75xx_wiring_w_TSM.

27

Page 26 Page 28
Page 27
Image 27
Lightning Audio 7532 manual Wiring Wiring with Tank Side Monitor, Grounding single sided on Tank Side Monitor 4590 TSM
Page 26 Page 28

7532 specifications

Lightning Audio 7532 is an innovative car audio amplifier designed to enhance the overall sound experience in vehicles. With a focus on delivering high-quality audio performance, this amplifier stands out with its robust features and cutting-edge technologies.

One of the primary characteristics of the Lightning Audio 7532 is its power output. The amplifier is capable of delivering an impressive 300 watts of RMS power, making it suitable for a wide range of audio systems. This power enables users to drive their speakers and subwoofers with clarity and precision, resulting in a dynamic listening experience. The amplifier has a two-channel configuration, which means it can efficiently amplify signals for front and rear speakers or can be bridged to drive a single subwoofer.

The Lightning Audio 7532 incorporates advanced technologies that enhance its performance. It features a high-pass and low-pass filter, allowing users to customize the audio output according to their preferences. This feature is particularly beneficial for those who wish to tailor their sound system's frequency response to suit different musical genres or personal tastes. Moreover, the amplifier includes a variable gain control, enabling users to adjust the overall volume and maintain optimal sound clarity without distortion.

Another notable aspect of the Lightning Audio 7532 is its thermal protection circuitry. This technology prevents the amplifier from overheating, ensuring reliable performance even during extended periods of use. Additionally, the amplifier is designed with durable components, contributing to its longevity and resilience against the rigors of automotive environments.

The installation process of the Lightning Audio 7532 is simplified by its compact size and user-friendly design. It features a clear layout for terminal connections, allowing for easy wiring and setup. This amplifier can easily fit into tight spaces within a vehicle, making it a versatile option for various car models.

In conclusion, the Lightning Audio 7532 amplifier combines power, flexibility, and durability, making it an excellent choice for car audio enthusiasts. With its impressive specifications and user-centric features, it promises to elevate any audio system and deliver an immersive experience on the road. Whether for everyday driving or long journeys, the Lightning Audio 7532 amplifies sound enjoyment and brings music to life in a way that resonates with every listener.
Top Page Image Contents