7532 | Technical data |
|
|
Inventory Control Ver- sions
All device types can be delivered as "Inventory Control Versions" with a reduced accuracy of ± 3mm (under reference conditions).
To these versions, the calibration certificate or custody transfer type approval is NOT attached.
The "Inventory Control Versions" can be selected by choosing the option »R« in feature »70« in the order code section »Custody transfer approvals« on page 8.
Operating conditions
Operating conditions
Engineering tips
See page 14
Environment
| Ambient temperature | Ambient temperature for the transmitter: | |
| range | • Standard: | |
|
| • For calibration to regulatory standards: | |
|
| °F…+140 °F) | |
|
| With | |
|
| reduced. | |
|
| A weather protection cover should be used for outdoor operation if | |
|
| the instrument is exposed to direct sunlight. | |
|
|
|
|
| Storage temperature | ||
|
|
|
|
| Climate class | DIN EN | |
|
|
|
|
| Degree of protection | • housing: IP 65, NEMA 4X (open housing: IP20, NEMA 1) | |
|
| • antenna: IP 68 (NEMA 6P) | |
|
|
|
|
| Vibration resistance | DIN EN | |
|
|
|
|
| Cleaning of the antenna | See »Technical Information« TEC028 | |
|
|
|
|
| Electromagnetic com- | • emissions according to EN 61326; equipment class B | |
| patibility | • compatibility according to EN 61326; appendix A (industrial area, | |
|
| 10 V/m) and Namur recommendation EMC (NE 21). | |
|
|
|
|
| Process conditions |
|
|
|
|
|
|
| Process temperature | See »Technical Information« TEC028 | |
| range |
|
|
|
|
|
|
| Process temperature | See »Technical Information« TEC028 | |
| limits |
|
|
|
|
|
|
| Process pressure limits | See »Technical Information« TEC028 | |
|
|
|
|
| Dielectric constant | • in a stilling well: εr ≥ 1.4 | |
|
| • in free space: εr ≥ 1.9 | |
|
|
|
|
| Wetted parts | • Planar, | |
|
| Wetted parts: 1.4435 / HNBR (Hydrated Nitrit Butadien Rubber, | |
|
| resistent to NH3) or FKM / PTFE glas fiber laminat | |
|
| Note! | |
|
| The planar antenna is not resistant to hot vapor! | |
|
| • Horn adapter for increase of diameter | |
|
| Wetted parts: 1.4435 | |
|
|
|
|
|
|
|
|
89